Front Toe Adjustment
WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- Loosen the jam nut on the tie rod (2).
- Rotate the inner tie rod (1) to the required toe specification setting. Refer to Wheel Alignment Specifications .
- Tighten the jam nut on the tie rod.
Tighten: Tighten the front tie rod jam nut to 68 N.m (50 lb ft).
- Check the toe setting after tightening.
- Adjust the toe setting if necessary.
NOTE:
Refer to Fastener Notice in Cautions and Notices.