Installation Procedure
WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the bulb into the socket.
- Install the lens to the vehicle.
- Install the bulb and socket assembly into the housing into the lens (if equipped).
- Insert the tab on the assembly into the slot in the door panel at the front edge.
- Pivot the assembly into the door panel.
- Press the lens at the rear until the lens snaps into place.