Installation Procedure
WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Position the liftgate handle to the liftgate.
- Install the bolts to the liftgate handle.
Tighten: Tighten the liftgate handle bolts to 4 N.m (35 lb in).
- Reconnect the outside handle swing over clip to the outside handle rod.
- Install the lock cylinder. Refer to Liftgate Lock Cylinder Replacement .
- Install the liftgate trim panel. Refer to Liftgate Trim Panel Replacement .
- Close the liftgate.
NOTE:
Refer to Fastener Notice
.