Disassembly Procedure

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Fresh Air Line

Courtesy of GENERAL MOTORS CORP.

Disengage the fresh air line (1) from the fuel tank clips and remove the fresh air line.

Fig 2: Fuel Feed Line

Courtesy of GENERAL MOTORS CORP.

Disconnect the fuel feed line quick connect fitting (1) from the fuel tank fuel pump module. Refer to Plastic Collar Quick Connect Fitting Service .
Open the retaining clip (3) on the fuel tank and remove the fuel feed line (2).

Fig 3: Vapor Line Quick Connect Fitting

Courtesy of GENERAL MOTORS CORP.

Disconnect the vapor line quick connect fitting (1) from the fuel tank vent valve. Refer to Plastic Collar Quick Connect Fitting Service .
Disconnect the vapor line quick connect fittings (2) from the fuel tank fuel pump module. Refer to Plastic Collar Quick Connect Fitting Service .
Remove the vapor line (5) from the retaining clip (4) and the retaining features (3) molded into the fuel tank.

Fig 4: Fuel Tank Wiring Harness

Courtesy of GENERAL MOTORS CORP.

Disconnect the fuel tank wiring harness (1) electrical connectors from the following:
- Primary fuel tank fuel pump module
- Fuel tank pressure sensor
- Secondary fuel tank fuel pump module
Remove the fuel tank wiring harness from the retaining clips (2 and 4) and the retaining features (3) molded into the fuel tank.

Fig 5: Fuel Tank Shield Retainers And Shield

Courtesy of GENERAL MOTORS CORP.

Remove the fuel tank shield retainers (1) and shield (2).
Remove the fuel tank fuel pump modules. Refer to Fuel Tank Fuel Pump Module Replacement and Fuel Tank Fuel Pump Module Replacement - Secondary .