September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Input Speed Sensor: Removal
- Remove the case side cover. See CASE SIDE COVER
.
- Disconnect the transaxle wiring harness. Remove the input speed sensor clip (441) from the case cover. See Fig 1
.
- Remove the input speed sensor (440) from the case cover. Inspect the input speed sensor (440) for the following conditions:
- Damaged or missing magnet.
- Damaged housing.
- Bent or missing electrical terminals.
- Damaged speed sensor clip (441).
Courtesy of GENERAL MOTORS CORP.