LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2003 >> Grand Am GT1 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle Servicing >> Removal & Installation >> Shift Control Cable >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Shift Control Cable: Installation

  1. Install the cable through the cowl and carpet.
  2. Install the cable grommet and the bolts in the cowl. Tighten the grommet bolts to specifications. See TORQUE SPECIFICATIONS  .
  3. Install the cable (4) at the shift control assembly (3). See Figure .
  4. Install the center control. See Figure .
  5. Install the cable at the transaxle cable brackets (1). See Figure .
  6. Install the cable at the transaxle selector lever (2).
  7. Install the negative battery cable.
  8. Adjust the cable as follows:
    1. Place the gearshift lever in the Neutral position.
    2. Place the transaxle in Neutral by rotating the selector shaft clockwise from Park through Reverse to Neutral.
    3. Pull the cable locking clip fully upward at the floor shift control. See Figure .
    4. Push the on the cable adjuster in order to adjust cable in the cable mounting bracket.
scientia non olet · About LEMON Manuals