Removal Procedure

NOTE: Handle the electronic throttle control components carefully. Use cleanliness in order to prevent damage. Do not drop the electronic throttle control components. Do not roughly handle the electronic throttle control components. Do not immerse the electronic throttle control components in cleaning solvents of any type.

Fig 1: Removing/Installing Vacuum Tank Screw

Courtesy of GENERAL MOTORS CORP.

Remove the screw (1) retaining the vacuum tank (2), and remove the vacuum tank.

Fig 2: Identifying Accelerator Pedal Sensor Module Connector

Courtesy of GENERAL MOTORS CORP.

Disconnect the electrical connector (1) of the accelerator pedal sensor module (2).

Fig 3: Identifying Accelerator Pedal Mounting Bolts

Courtesy of GENERAL MOTORS CORP.

Remove the accelerator pedal mounting bolts (1).
Slide the APP sensor upwards, to disengage the sensor from the support bracket (3).
Remove the accelerator pedal (2).