LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2006 >> GTO Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 6.0L - Introduction (2 Of 2) >> Repair Instructions >> Air Cleaner Assembly Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Removing/Installing Air Cleaner Duct & Attached Wiring Connectors
    GM1553639Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the wiring harness connector (2) to the intake air temperature (IAT)/mass air flow (MAF) sensor (1).
    2. Fig 2: Removing/Installing Air Duct Adaptor
    GM1553642Courtesy of GENERAL MOTORS CORP.
  2. Loosen the clamp securing the air intake duct to the throttle body (5), then loosen the clamp securing the MAF sensor to the air cleaner upper body (2).
  3. Remove the duct together with the IAT/MAF sensor still installed.
    4. Fig 3: View Of Air Cleaner Body
    GM1556482Courtesy of GENERAL MOTORS CORP.
  4. Remove 3 retainer screws securing the air cleaner upper body.
  5. Remove air cleaner upper body and air cleaner filter assembly.
    6. Fig 4: Identifying Air Cleaner Lower Body Components
    GM1556476Courtesy of GENERAL MOTORS CORP.
  6. Remove the 3 retainer screws (1) securing the air cleaner lower body to the fender inner panel insulators.
  7. Remove the air cleaner air inlet duct (2) from lower body, then remove air cleaner lower body.
scientia non olet · About LEMON Manuals