Scan Tool Data List
WARNING: This page is about a different variant/trim than selected.
Body Control Module (BCM)
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Operating Conditions: Ignition ON, with the Engine OFF. Transmission Shift Lever in the PARK Position. | |||
| Battery Voltage Signal | BCM, Power Mode | 0-15 volts | 12 volts |
| Brake Lamp Command | BCM, Chassis Data | ON/OFF | ON |
| Shift Lock Solenoid Command | BCM, Chassis Data | Unlock/Lock | Lock |
Engine Control Module (ECM)
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Operating Conditions: Ignition ON, with the Engine OFF. Transmission Shift Lever in the PARK Position. | |||
| Ignition 1 Signal | ECM, Engine Data | Volts | 12 V |
| TR Sw. | Transmission Data | Park, Reverse, Neutral, Drive 5, Drive 4, Drive 3, Drive 3, Drive 2, Drive 1 | Park |