Air Temperature Sensor ( Ambient / Intake ): Service and Repair

INTAKE AIR TEMPERATURE (IAT) SENSOR REPLACEMENT

REMOVAL PROCEDURE




1. Disconnect the negative battery cable.

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.

2. Disconnect the intake air temperature (IAT) sensor connector.
3. Remove the IAT sensor by pulling it out of the air intake tube.

INSTALLATION PROCEDURE




1. Insert the IAT sensor into the air intake tube.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Connect the IAT sensor connector.
3. Connect the negative battery cable.