LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 1989 >> Justy DL >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Testing >> Performance Tests >> Load Test
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Load Test

  1. Connect voltmeter and ammeter to battery. Connect tachometer to engine. Disconnect ignition coil secondary wire from distributor and ground it. Turn ignition switch to "START" position.
  2. Cranking voltage should be 8 volts at 200 amps, with starter rotating at 1200 RPM or more.
scientia non olet · About LEMON Manuals