September 30: LEMON manuals is back up on a temporary server! Slowness is possible
No Load Test
- Remove starter. Connect ammeter in series with starter motor and 12-volt battery. Connect voltmeter in parallel with battery and observe readings. See appropriate NO LOAD TEST SPECIFICATIONS table.
NO LOAD TEST SPECIFICATIONS (EXCEPT XT & XT6)
| Application |
Specification |
| Starter Rotation |
4000 RPM |
| Current Draw |
90 Amps |
| Voltage |
11 Volts |
NO LOAD TEST SPECIFICATIONS (XT & XT6)
| Application |
Specification |
| Starter Rotation |
| A/T |
2900 RPM |
| M/T |
3000 RPM |
| Current Draw |
90 Amps |
| Voltage |
11 Volts |
- Starter should rotate at 4000 RPM on DL, GL, GL-10 and RX with current draw less than 90 amps at 11 volts. On XT/XT6, starter should rotate at 2900 RPM for A/T, 3000 for M/T with current draw less than 90 amps at 11 volts.