October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Throttle Position Sensor: Service and Repair

1. Disconnect battery ground cable.

2. Disconnect connector from throttle position sensor.

3. Remove throttle position sensor holding screws, and remove it.

4. Installation is in the reverse order of removal.

Tightening torque:
2.2 ± 0.2 N.m (0.22 ± 0.02 kg.m 1.6 ± 0.1 ft.lb)

CAUTION: When installing throttle position sensor, adjust to the specified data.