October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Installation

1. Install knock sensor to cylinder block.

Tightening torque:
23.5 ± 2.9 N.m (2.4 ± 0.3 kg.m, 17.4 ± 2.2 ft.lb)

NOTE: The extraction area of the knock sensor cord must be positioned at a 45° angle relative to the engine rear.

2. Connect knock sensor connector.

3. Install air cleaner case.

4. Connect battery ground cable.