LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2000 >> Outback Base, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Starters >> Bench Testing >> Solenoid Tests >> Solenoid Pull-In Test (Legacy)
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Solenoid Pull-In Test (Legacy)

Connect jumper wire from negative battery terminal to starter solenoid case. Connect another jumper wire from negative battery terminal to starter solenoid terminal "C". See Fig 1. Pinion should extend when jumper wire from battery positive terminal is connected to solenoid terminal No. 50. If pinion does not extend as specified, replace starter.

Fig 1: Testing Starter Solenoid Pull-In & Hold-In Windings (Legacy)
G91J01160Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals