LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2000 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (On-Vehicle Service & Testing) >> Service Procedure >> Inhibitor Switch >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inhibitor Switch: Removal

WARNING: This page is about a different car, the 2001 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Move select lever to neutral position.
  2. Remove air cleaner case and duct.
  3. Disconnect inhibitor switch connector "A".
    Fig 1: Identifying Inhibitor Switch Connector "A"
    G02003115
  4. Remove front exhaust pipe.
  5. Remove snap pin from range select lever.
    Fig 2: Removing Snap Pin From Range Select Lever
    G02003116
  6. Remove plate assembly from transmission case.
    Fig 3: Removing Plate Assembly From Transmission Case
    G02003117
  7. Remove bolts.
    Fig 4: Removing Bolts
    G02003118
  8. Move range select lever to parking position (left side).
    Fig 5: Moving Range Select Lever To Parking Position (Left Side)
    G02003119
  9. Remove inhibitor switch from transmission.
    Fig 6: Removing Inhibitor Switch From Transmission
    G02003120
scientia non olet · About LEMON Manuals