Separation Of Each Section

WARNING: This page is about a different car, the 2001 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Separation of torque converter clutch case and transmission case sections
CAUTION:
- Be careful not to damage the oil seal and bushing inside the torque converter clutch case by the oil pump cover.
- Be careful not to lose the rubber seal.
NOTE: Separate these cases while tapping lightly on the housing.

Fig 1: Separating 2 Front Sections Of Transmission Case
Separation of transmission case and extension sections
1. Remove vehicle speed sensor 1 (rear).
  
  Fig 2: Removing Vehicle Speed Sensor 1 (Rear)
2. Separation of transmission case and extension case sections
  
  Fig 3: Identifying Transmission Case To Extension Case Section Fasteners