Clutch Cable: Installation
WARNING: This page is about a different car, the 2001 Subaru Impreza and 2000 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
- Clean clutch pedal fitting hole, and apply grease. Connect clutch cable to clutch pedal.
- Fit clutch pedal to pedal bolt, and connect clutch cable to bracket with clamp.
- Connect clutch cable end to pedal end.
- Connect clutch cable from release lever.
- Install grommet to toe board.
- Adjust after cable installation. See ADJUSTMENT .