Power Window Switch: Service and Repair

Power Window Control Switch

REMOVAL

1. MAIN SWITCH
1. Disconnect the ground cable from the battery.
2. Open the cover and remove the screws, then remove the power window main switch panel.






NOTE: Remove it from the cutout portion at the tip of the switch panel.






3. Disconnect the connector.
4. Remove the screws and remove the power window main switch assembly.

2. SUB-SWITCH
1. Open the cover and remove the screws, then remove the power window main switch panel.






NOTE: Remove from the notched part at the edge of the switch panel.






2. Disconnect the connector.
3. Remove the screws and remove the power window main switch assembly.

INSTALLATION

Install in the reverse order of removal.