LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2009 >> Forester XT >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Engine (Diagnostics) (H4DOTC) >> Drive Cycle >> Procedure >> Drive Cycle E
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Drive Cycle E

  1. Make sure that the battery voltage is 10.9 V or more.
  2. Perform the Clear Memory Mode. Refer to CLEAR MEMORY MODE .
  3. Drive the vehicle for the distance equal to the fuel of 30 (7.9 US gal, 6.6 Imp gal).
NOTE:
  • It is acceptable to drive the vehicle intermittently.
  • Do not disconnect the battery terminals while diagnosing. (Data will be cleared by disconnecting the battery terminals).
DTC ITEM CONDITION CHART

DTC Item Condition
P0461 Fuel Level Sensor "A" Circuit Range/Performance -