Knock Sensor: Removal

WARNING: This page is about a different variant/trim than selected.

Disconnect the ground cable from the battery.

Fig 1: Disconnecting Ground Cable Of Battery
Courtesy of SUBARU OF AMERICA, INC.
Remove the air intake chamber. Refer to REMOVAL , Air Intake Chamber .
Disconnect the knock sensor connector.

Fig 2: Identifying Knock Sensor Connector
Courtesy of SUBARU OF AMERICA, INC.
Remove the knock sensor from the cylinder block.

Fig 3: Identifying Knock Sensor To Cylinder Block

Courtesy of SUBARU OF AMERICA, INC.