October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Control Module: Service and Repair

REMOVAL
1. Disconnect the ground cable from battery.
2. Remove the instrument panel lower cover and disconnect the connector.
3. Disconnect the connector from TCM.

4. Remove the TCM.

INSTALLATION
1. Install the TCM.
Tightening torque: 7.5 N-m (0.8 kgf-m, 5.5 ft-lb)

2. Connect the connector to the TCM.
3. Install in the reverse order of removal.
4. Execute the learning control promotion.