LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2009 >> Outback Limited >> Repair and Diagnosis >> Body & Frame >> Windows >> Window Glass System And Mirror System - Glass/Window/Mirrors >> Windshield Glass >> Removal >> Using Piano Wire
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Using Piano Wire

  1. Disconnect the ground cable from the battery.
  2. Remove the passenger side front pillar trim, and disconnect the wiper deicer connector. (Models with wiper deicer)
  3. Remove the cowl panel.

    Ref. to REMOVAL , Cowl Panel.

  4. Remove the molding.
  5. Tape the body side of the circumference of windshield glass for protection.
  6. Make a hole in the adhesive part using drill or knife.
  7. Pass the piano wire through the hole, and attach both the wire ends securely to pieces of wood.
    Fig 1: Passing Piano Wire Through Hole
    G05004259Courtesy of SUBARU OF AMERICA, INC.
  8. Pull the wire ends alternately to cut off the adhesive part.
    CAUTION:
    • Do not tightly pull the piano wire against the windshield glass edge.
    • Be careful not to damage interior and exterior parts.
    • When removal is made with area close to instrument panel, place a protection plate over it. Pay particular attention to the removal.
    • Do not cross piano wires. Otherwise they may be cut.
scientia non olet · About LEMON Manuals