Universal Joint: Installation

Align the cutout portion at serrated section of the column shaft and yoke, then install the universal joint into column shaft.

Fig 1: Installation Position Of Universal Joint
Courtesy of SUBARU OF AMERICA, INC.
Install the universal joint to the serrations of gearbox assembly by matching alignment marks.
Tighten the bolts.
Tightening torque:

24 N.m (2.4 kgf-m, 17.7 ft-lb)

CAUTION: Excessively large tightening torque of universal joint bolts may lead to heavy steering wheel operation.
Align the center position of the roll connector. Refer to ADJUSTMENT , Roll Connector.
Install the steering wheel. Refer to INSTALLATION , Steering Wheel.