SI-DRIVE (SUBARU Intelligent Drive) S# Switch: Removal

Disconnect the ground cable from battery.

Fig 1: Disconnecting Battery Ground Cable
Courtesy of SUBARU OF AMERICA, INC.
Remove the airbag module. Refer to REMOVAL , Driver's Airbag Module.
WARNING: Always refer to CAUTION before performing service on the airbag modules.
Remove the screws which secure the SI-DRIVE S# switch to the steering wheel, and remove the SI-DRIVE S# switch.

Fig 2: Locating SI-DRIVE Selector Switch Screws
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the connectors from the SI-DRIVE S# switch.