October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

ATF Level

After selecting all positions (P, R, N, D), set the select lever in "P" range. Idle the engine for 1 or 2 minutes, and measure the ATF level. If the amount is insufficient, check that no leaks are found. Then, add the necessary amount of the specified ATF.

4AT

Fig 1: Identifying ATF Level Gauge - 4AT
Courtesy of SUBARU OF AMERICA, INC.
5AT

Fig 2: Identifying ATF Level Gauge - 5AT
Courtesy of SUBARU OF AMERICA, INC.