LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2009 >> Tribeca Base >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Injection System (H6DO) >> Mass Air Flow and Intake Air Temperature Sensor >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Mass Air Flow and Intake Air Temperature Sensor: Removal

  1. Disconnect the ground cable from the battery.
  2. Disconnect the connector from mass air flow and intake air temperature sensor.
    Fig 1: Locating Mass Air Flow And Intake Air Temperature Sensor
    G05031139Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the mass air flow and intake air temperature sensor.
    Fig 2: Locating Mass Air Flow And Intake Air Temperature Sensor
    G05031043Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals