Auto Dimmer Cancel
WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSTICS PROCEDURE
| Step | Check | Yes | No |
|---|---|---|---|
| 1 CHECK BODY INTEGRATED UNIT SETTING
. Display the data of «Auto Dimmer Cancel Setting » using Subaru Select Monitor.
NOTE:
For detailed procedures, refer to "PC application help for Subaru Select Monitor".
|
Is the setting ON? | Go to step 2 . | Turn the setting to ON. |
| 2 AUTO HEADLIGHT SYSTEM CHECK
. Check the operation of auto headlight system. |
Is the auto headlight system normal? | Go to step 3 . | Check and repair the auto headlight system. <Ref. to AUTO HEADLIGHT SYSTEM CHECK , INSPECTION, Headlight System.> |
| 3 CHECK ILLUMINATION CONTROL SYSTEM
. Check the operation of illumination control system. |
Is the illumination control system normal? | Check the body integrated unit and replace it if defective. <Ref. to BASIC DIAGNOSTIC PROCEDURE .> | Check and repair the illumination control system. <Ref. to SWITCH , INSPECTION, Combination Meter System.> |