LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2019 >> Ascent Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Vehicle Dynamics Control (VDC) System >> Auto Vehicle Hold Switch >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Auto Vehicle Hold Switch: Installation

  1. Install the AVH switch.
  2. Install the switch panel front. Ref. to EXTERIOR/INTERIOR TRIM>CENTER CONSOLE>INSTALLATION .
  3. Connect the battery ground terminal. Ref. to REPAIR CONTENTS>NOTE>BATTERY>GROUND TERMINAL REMOVAL OR INSTALLATION .
    NOTE: After connecting the battery ground terminal, place the select lever in the "P" position.
scientia non olet · About LEMON Manuals