October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Drive Plate: Installation
- Temporarily install the drive plate and reinforcement drive plate.
- Set the ST in the position shown in the figure.
Preparation tool:
ST: CRANKSHAFT STOPPER (498497300)
 Courtesy of SUBARU OF AMERICA, INC.
|
- Tighten the drive plate mounting bolt in two stages.
NOTE:
Fix the engine unit.
- Tighten the drive plate mounting bolt.
Tightening torque:
30 N.m (3.1 kgf-m, 22.1 ft-lb)
- While checking the tightening angle with the angle gauge, tighten the drive plate mounting bolts to the specified angle.
Tightening angle:
30° - 35°
 Courtesy of SUBARU OF AMERICA, INC.
|
- Install the transmission body. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>TRANSMISSION ASSEMBLY>INSTALLATION .