LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2019 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Vehicle Dynamics Control (VDC) System >> VDC Sequence Control >> Operation >> VDC Sequence Control With Subaru Select Monitor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

VDC Sequence Control With Subaru Select Monitor

NOTE: In the event of any trouble, sequence control will not operate.
  1. Connect the Subaru Select Monitor.
    NOTE: For detailed operation procedures, refer to "Help" of application.
    1. Turn the ignition switch to ON.
    2. On [Start] display, select [Diagnosis].
    3. On [Select Vehicle] display, input the target vehicle information and select [OK].
    4. On [Main Menu] display, select [Each System].
    5. On [Select System] display, select [Brake Control], and then select [Enter].
    6. On [Select Function] display, select [Work Support].
    7. On the work support item list, select [VDC Check Mode].
  2. Operate according to the procedures displayed in the Subaru Select Monitor.
  3. The brake system being operated is displayed on the Subaru Select Monitor.
scientia non olet · About LEMON Manuals