LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2019 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> Suspension >> Front Suspension System And Wheel Alignment >> Stabilizer >> Removal >> Stabilizer
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Suspension System And Wheel Alignment: Stabilizer: Removal: Stabilizer

  1. Lift up the vehicle.
  2. Remove the under cover - front.

    Refer to EXTERIOR/INTERIOR TRIM>FRONT UNDER COVER>REMOVAL .

  3. Remove the crossmember support - rear.

    Refer to FRONT SUSPENSION>CROSSMEMBER SUPPORT>REMOVAL .

  4. Remove the front exhaust pipe.

    Refer to EXHAUST (H4DO) EXCEPT FOR HEV))>FRONT EXHAUST PIPE>REMOVAL .

  5. Remove the left and right stabilizer links (bottom part).
    G12400565Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the clamp - stabilizer bushing on the left and right sides.
    G11253795Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the stabilizers.