Inspection Mode G
| DTC | Item | Condition |
|---|---|---|
| P0708 | TRANSMISSION RANGE SENSOR "A" CIRCUIT HIGH | - |
Diagnostic procedure:
- Start the engine.
- Check the readiness code using Subaru Select Monitor and confirm that the diagnosis is not completed. Refer to TRANSMISSION (DIAGNOSTICS)>ALL READINESS DIAGNOSTIC CODE(S) .
- Drive for three seconds at 16 km/h (10 MPH).NOTE: Drive in "D" range and "R" range.
- Check the readiness code using Subaru Select Monitor, confirm that the diagnosis is completed, and end the procedure.