Inspection Mode J
| DTC | Item | Condition |
|---|---|---|
| P0746 | PRESSURE CONTROL SOLENOID "A" PERFORMANCE/STUCK OFF | Perform inspection mode J twice |
| P0747 | PRESSURE CONTROL SOLENOID "A" STUCK ON | Perform inspection mode J twice |
Diagnostic procedure:
- Start the engine.
- Warm up until the ATF temperature displayed on the Subaru Select Monitor is 20°C (68°F) or more.
- Check the readiness code using Subaru Select Monitor and confirm that the diagnosis is not completed. Refer to TRANSMISSION (DIAGNOSTICS)>ALL READINESS DIAGNOSTIC CODE(S) .
- Drive in any driving pattern for 20 minutes. (Include driving at a constant legal speed (for 20 seconds) at least once.)
- Turn the ignition switch to OFF and wait for 30 seconds or more.
- Start the engine.
- Drive in any driving pattern for 20 minutes. (Include driving at a constant legal speed (for 20 seconds) at least once.)
- Turn the ignition switch to OFF and wait for 30 seconds or more.
- Start the engine.
- Check the readiness code using Subaru Select Monitor and confirm that the diagnosis is completed.