LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2019 >> Forester Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Diagnostics - Introduction) >> Inspection Mode >> Procedure >> Inspection Mode J
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Inspection Mode J

DTC Item Condition Number of driving cycles on the detecting condition
P2610 ECM/PCM ENGINE OFF TIMER PERFORMANCE - 2
  1. Idle the engine for 15 minutes or more.
  2. Turn the ignition switch to OFF.
  3. After at least 10 hours passed from the start of step 2), read the temporary code using the Subaru Select Monitor or general scan tool. Ref. to COMMON(DIAG)>DIAGNOSTIC TROUBLE CODE (DTC) .
scientia non olet · About LEMON Manuals