LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2019 >> Outback 2.5i >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Power Rear Gate System >> Power Rear Gate Driver's Switch >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Power Rear Gate Driver's Switch: Installation

  1. Install the power rear gate driver's switch.
  2. Install the cover assembly - instrument panel LWR driver.
  3. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals