LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2019 >> Outback 2.5i >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Power Rear Gate System >> Power Rear Gate Touch Sensor >> Removal >> Touch Sensor LWR
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Touch Sensor LWR

  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the trim panel - rear gate. Ref. to EXTERIOR/INTERIOR TRIM>REAR GATE TRIM>REMOVAL .
  3. Remove the power rear gate touch sensor LWR
    1. Remove the screws and clips.
    2. Disconnect the connector and remove the power rear gate touch sensor LWR.
G10309986Courtesy of SUBARU OF AMERICA, INC.