LEMON Manuals
: Even more car manuals for everyone: 1960-2025
Home
>>
Subaru
>>
2019
>>
Outback 2.5i
>>
Repair and Diagnosis
>>
Engine Performance
>>
System
>>
Engine Control System (2.5L) (Diagnostics - Introduction)
>>
Diagnostics for Engine Starting Failure
>>
Procedure
July 1:
So it begins
. Don't worry, this is not in the correct legal jurisdiction!
Diagnostics for Engine Starting Failure: Procedure
Check of the fuel amount
↓
2. CHECK IMMOBILIZER.
Model without push button start. Ref. to
IMMOBILIZER (DIAGNOSTICS)>BASIC DIAGNOSTIC PROCEDURE
.
Model with push button start. Ref. to
KEYLESS ACCESS WITH PUSH BUTTON START SYSTEM (DIAGNOSTICS)>BASIC DIAGNOSTIC PROCEDURE
.
↓
3. Inspection of starter motor circuit. Ref. to
ENGINE (DIAGNOSTICS) (H4DO)>DIAGNOSTICS FOR ENGINE STARTING FAILURE>STARTER MOTOR CIRCUIT
.
↓
4. Inspection of ECM power supply and around line. Ref. to
ENGINE (DIAGNOSTICS) (H4DO)>DIAGNOSTICS FOR ENGINE STARTING FAILURE>CHECK POWER SUPPLY AND GROUND LINE OF ENGINE CONTROL MODULE (ECM)
.
↓
5. Inspection of ignition control system. Ref. to
ENGINE (DIAGNOSTICS) (H4DO)>DIAGNOSTICS FOR ENGINE STARTING FAILURE>IGNITION CONTROL SYSTEM
.
↓
6. Inspection of fuel pump circuit. Ref. to
ENGINE (DIAGNOSTICS) (H4DO)>DIAGNOSTICS FOR ENGINE STARTING FAILURE>FUEL PUMP CIRCUIT
.
↓
7. Inspection of fuel injector circuit. Ref. to
ENGINE (DIAGNOSTICS) (H4DO)>DIAGNOSTICS FOR ENGINE STARTING FAILURE>FUEL INJECTOR CIRCUIT
.