LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2019 >> Outback 2.5i >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Engine Lubrication System (3.6L)) >> Oil Level Switch >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Oil Level Switch: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the under cover, Ref. to EXTERIOR/INTERIOR TRIM>FRONT UNDER COVER>REMOVAL .
  3. Drain the engine oil. Ref. to LUBRICATION (H6DO)>Engine Oil>REPLACEMENT .
  4. Disconnect the connector of the oil level switch from the engine harness, and remove the clip securing the harness to the front camshaft cap (LH) and the cylinder head (LH).
    G10264249Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the oil level switch from the oil pan upper.
    G10264250Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals