Without DTC
Detecting condition:
- Defective combination meter
- Open circuit of harness
Trouble symptom:
- The STEERING warning light will not turn off.
- «No DTC» will be displayed on Subaru Select Monitor.
NOTE:
Read all DTCs with the STEERING warning light OFF. When «No DTC» is displayed on Subaru Select Monitor, the system is operating properly.
- CHECK LAN SYSTEM
.
Perform the diagnosis for LAN system using the Subaru Select Monitor. Ref. to LAN SYSTEM (DIAGNOSTICS)>BASIC DIAGNOSTIC PROCEDURE .
Is DTC U0131 detected?
Yes Perform the diagnosis according to DTC for LAN system. Ref. to LAN SYSTEM (DIAGNOSTICS)>LIST OF DIAGNOSTIC TROUBLE CODE (DTC) .
No Go to 2 .
- CHECK COMBINATION METER
.
Check the STEERING warning light when the ignition is turned from OFF to ON.
Does the STEERING warning light illuminate at ignition switch ON, and turn off two seconds after the engine is started?
Yes Finish the diagnosis.
No Replace the combination meter. Ref. to INSTRUMENTATION/DRIVER INFO>COMBINATION METER .