LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2019 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (CVT Transaxle) >> Front Reduction Drive Gear >> Assembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Reduction Drive Gear: Assembly

WARNING: This page is about a different variant/trim than selected.
  1. Using the ST, install the ball bearing to front reduction drive gear.
    NOTE: Use a new ball bearing.
    ST 18651AA000 INSTALLER
    G06654772Courtesy of SUBARU OF AMERICA, INC.
  2. Using ST1 and ST2, install the ball bearing to front reduction drive gear.
    NOTE: Use a new ball bearing.
    ST1 499757002 INSTALLER
    ST2 398177700 INSTALLER
    G06654773Courtesy of SUBARU OF AMERICA, INC.
  3. Install the seal rings.
    NOTE:
    • Use new seal rings.
    • When installing the seal rings, do not expand the seal rings too much.
    • Install the O-ring when installing the torque converter assembly.
    G09482348Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals