LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2019 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (CVT Transaxle) >> Primary Speed Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Primary Speed Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
CAUTION: Be sure to prevent water or oil from contacting the connector terminal of primary speed sensor. If adhesion occurs, replace with a new part.
  1. Disconnect the ground terminal from battery sensor. Refer to NOTE>NOTE>BATTERY .
  2. Remove the collector cover. Refer to INTAKE (INDUCTION) (EXCEPT FOR STI)>COLLECTOR COVER>REMOVAL .
  3. Remove the intercooler. Refer to INTAKE (INDUCTION) (EXCEPT FOR STI)>INTERCOOLER>REMOVAL .
  4. Clean the transmission exterior.
  5. Remove the primary speed sensor harness connector.
    G09481936Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the primary speed sensor and the spacer.
    G09482007Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals