LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2019 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (CVT Transaxle) >> Transfer Reduction Driven Gear >> Assembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transfer Reduction Driven Gear: Assembly

WARNING: This page is about a different variant/trim than selected.
  1. Install the new ball bearing (large) to reduction driven gear using the ST.
    ST 499277100 BUSHING 1-2 INSTALLER
    NOTE:
    • Use a new ball bearing.
    • Install to the splines inside transfer reduction driven gear shaft.
    G06654536Courtesy of SUBARU OF AMERICA, INC.
  2. Install the new ball bearing (small) to reduction driven gear.
    NOTE: Use a new ball bearing.
    ST 499277100 BUSHING 1-2 INSTALLER
    G06654536Courtesy of SUBARU OF AMERICA, INC.
  3. Install the snap ring to the transfer reduction driven gear.
scientia non olet · About LEMON Manuals