October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Check Accelerator Pedal Sensor Area (Method With Circuit Tester)
- Remove the glove box. Refer to EXTERIOR/INTERIOR TRIM>GLOVE BOX>REMOVAL
.
- Turn the ignition switch to ON. (Engine OFF)
- Measure the voltage between ECM connector terminals.
- Main sensor side
 Courtesy of SUBARU OF AMERICA, INC.
|
- Sub sensor side
 Courtesy of SUBARU OF AMERICA, INC.
|
| Accelerat or pedal sensor |
Accelerat or pedal |
Terminal No. |
Standard |
| Main |
Not depressed (full closed) |
23 (+) and 29 (-) |
0.4 - 1.0 V |
| Depressed (full opened) |
2.4 - 3.7 V |
| Accelerat or pedal sensor |
Accelerat or pedal |
Terminal No. |
Standard |
| Sub |
Not depressed (full closed) |
31 (+) and 30 (-) |
0.3 - 1.1 V |
| Depressed (full opened) |
2.3 - 3.8 V |
- After inspection, install the related parts in the reverse order of removal.