Oil Pressure Switch: Installation

Apply liquid gasket to the oil pressure switch threads.
Liquid gasket:

THREE BOND 1324 (Part No. 004403042) or equivalent

Courtesy of SUBARU OF AMERICA, INC.
Install the oil pressure switch to cylinder block.
Tightening torque:

25 N.m (2.5 kgf-m, 18.4 ft-lb)

Courtesy of SUBARU OF AMERICA, INC.
Connect the terminal to the oil pressure switch.

Courtesy of SUBARU OF AMERICA, INC.
Install the generator to the bracket. Refer to STARTING/CHARGING SYSTEMS (STI)>GENERATOR>INSTALLATION .
Connect the battery ground terminal.