Inspection Mode 8
| DTC | Item | Note |
|---|---|---|
| U0101 | LOST COMMUNICATION WITH TCM | BIU detects DTC only when [MT/AT Setting] is [AT]. |
| U0128 | LOST COMMUNICATION WITH PARK BRAKE CONTROL MODULE | BIU detects DTC only when [EPB setting] is [Support]. |
| U0164 | LOST COMMUNICATION WITH HVAC CONTROL MODULE | BIU detects DTC only when [Auto A/C Setting] is [Support]. |
| U0169 | LOST COMMUNICATION WITH SUNROOF CONTROL MODULE | BIU detects DTC only when [Sunroof setting] is [Support]. |
| U0222 | LOST COMMUNICATION WITH DRIVER'S DOOR POWER WINDOW | BIU detects DTC only when [P/W ECU Setting] is [Driver Seat], [Driver/Passenger Seat] or [Four Seat]. |
| U0223 | LOST COMMUNICATION WITH PASSENGER'S DOOR POWER WINDOW | BIU detects DTC only when [P/W ECU Setting] is [Driver/Passenger Seat] or [Four Seat]. |
| U0224 | LOST COMMUNICATION WITH RR DOOR POWER WINDOW | BIU detects DTC only when [P/W ECU Setting] is [Four Seat]. |
| U0225 | LOST COMMUNICATION WITH RL DOOR POWER WINDOW | BIU detects DTC only when [P/W ECU Setting] is [Four Seat]. |
| U0230 | LOST COMMUNICATION WITH REAR GATE MODULE | BIU detects DTC only when [Power rear gate setting] is [Support]. |
| U0231 | LOST COMMUNICATION WITH RAIN SENSING MODULE | BIU detects DTC only when [Rain drop Detection Sensor Setting] is [Support]. |
| U0402 | INVALID DATA RECEIVED FROM TCM | BIU detects DTC only when [MT/AT Setting] is [AT]. |
| U0417 | INVALID DATA RECEIVED FROM PARK BRAKE CONTROL MODULE | BIU detects DTC only when [EPB setting] is [Support]. |
| U0424 | INVALID DATA RECEIVED FROM HVAC CONTROL MODULE | BIU detects DTC only when [Auto A/C Setting] is [Support]. |
| U1283 | LOST COMMUNICATION WITH EYESIGHT SA-BUS | BIU detects DTC only when [HBA setting (mirror/EyeSight)] is [EyeSight HBA Yes]. |
| U1584 | INVALID DATA RECEIVED FROM EYESIGHT SA-BUS | BIU detects DTC only when [HBA setting (mirror/EyeSight)] is [EyeSight HBA Yes]. |
| U1673 | LIN COMMUNICATION BUS ERROR BODY CONTROL MODULE | BIU detects DTC only when any of the following customize settings is established:
|
| U1674 | LIN COMMUNICATION BUS 2 ERROR BODY CONTROL MODULE | BIU detects DTC only when [P/W ECU Setting] is [Driver Seat], [Driver/Passenger Seat] or [Four Seat]. |
| U1769 | LOST COMMUNICATION WITH SUNSHADE CONTROL MODULE | BIU detects DTC only when [Sunshade ECU Setting] is [Exist]. |
| U1822 | LOST COMMUNICATION WITH MASTER MAIN SWITCH | BIU detects DTC only when [P/W ECU Setting] is [Driver Seat], [Driver/Passenger Seat] or [Four Seat]. |
Diagnostic procedure:
- Using the Subaru Select Monitor, perform the clear memory of [Body Control]. Ref. to COMMON (DIAGNOSTICS)>CLEAR MEMORY .
- Using the Subaru Select Monitor, read the DTC of [Body Control] to check that there is no DTC displayed. Ref. to BODY CONTROL (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. After solving the DTC, repeat from step 1. Ref. to BODY CONTROL (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC)>LIST .
- Confirm that [Customize] items of [Body Control] correspond to the vehicle. Ref. to BODY CONTROL (DIAGNOSTICS)>CUSTOMIZE .
- Turn the ignition switch OFF → ON, and wait for 10 seconds or more.
- Using the Subaru Select Monitor, read the DTC of [Body Control] to check that there is no DTC displayed. Ref. to BODY CONTROL (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .
NOTE:
If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. Ref. to BODY CONTROL (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC)>LIST .