Inspection Mode: Procedure: Notes

It is possible to diagnose the DTC by performing the indicated inspection mode. After correcting the DTC, perform a necessary inspection mode and make sure that the function is resumed correctly and the DTC is recorded.

1. PREPARATION FOR THE INSPECTION MODE 
   1. Check that the battery voltage is 12 V or more and fuel remains approx. half [20 - 40 L (5.3 - 10.6 US gal, 4.4 - 8.8 Imp gal)].
   2. After performing the diagnostics and clearing memory, check that no DTC remains.
      NOTE: Perform the inspection mode after warming up the engine except when the ATF temperature at engine start is specified.