Check Pressure Solenoid Unit

Check the resistance of pressure solenoids.

NOTE: Measurement should be performed at 20°C (68°F).

Courtesy of SUBARU OF AMERICA, INC.

	Terminal No.	Standard
Pressure solenoid A (SL1)	1 - 2	5.0 - 5.6 Ω
Pressure solenoid B (SL2)	1 - 2	5.0 - 5.6 Ω
Pressure solenoid D (SLT)	1 - 2	5.0 - 5.6 Ω
Torque converter clutch pressure solenoid (SLU)	1 - 2	5.0 - 5.6 Ω

Apply battery voltage to the pressure solenoid terminals and check the operation status.

CAUTION: When applying battery voltage, use a 12 V - 21 W bulb.
When applying battery voltage, do not mix up the positive (+) side and the negative (-) side.

For pressure solenoids A (SL1) and B (SL2)

Terminal No.	Inspection conditions	Judgment standards
1 (+) - 2 (-)	Apply battery voltage.	Operates (with operating noise)

Courtesy of SUBARU OF AMERICA, INC.

(A)	12 V - 21 W bulb

For pressure solenoid D (SLT) and torque converter clutch pressure solenoid (SLU)

Terminal No.	Inspection conditions	Judgment standards
2 (+) - 1 (-)	Apply battery voltage.	Operates (with operating noise)

Courtesy of SUBARU OF AMERICA, INC.

(A)	12 V - 21 W bulb