Spot Map Light: Inspection
WARNING: This page is about a different car, the 2023 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
- Measure the resistance between connector terminals.
Preparation tool:
Circuit tester
- Light switch
Terminal No. Inspection conditions Standard 1 - 13 Switch OFF 1 MΩ or more Switch ON Approx. 18 Ω - Door switch
Terminal No. Inspection conditions Specification 1 - 4 Switch door Continuity exists - Light switch
- Replace the cover assembly stereo camera if faulty is found in the inspection.