Body Control/Communication System: General Description: Caution
- When Performing Service Operation, Refer To "Repair Contents" In "General Description". Ref. To Repair Contents>Repair Contents .
- Before Disconnecting Connectors Of Sensors Or Units, Be Sure To Disconnect The Ground Terminal From The Battery Sensor.
- When Replacing The Parts Provided With Memory Functions, Record The Memory Contents Before Disconnecting The Ground Terminal From The Battery Sensor.
- If Any Immobilizer Related Part Has Been Replaced, Make Sure To Register The Immobilizer.
- Be Careful Of The Following Items. Failing To Do So May Cause The Airbag System Malfunction.
- Yellow Connectors And Harnesses With Yellow Tapes Around Them Are The Connectors And Harnesses For The Airbag System. When Using A Tester On These Circuits, Follow The Cautions Of "Airbag System". Ref. To Airbag System>General Description>Caution .
- Be Careful Not To Damage The Airbag System Wiring Harness When Servicing The Electrical Parts Around The Steering Column.
- When Removing, Installing Or Replacing The Vdc Control Module & H/U, Vdc Control Module & H/U Bracket, Steering Wheel Or Steering Angle Sensor (Steering Roll Connector), Perform "Vsc (Vdc) Centering Mode" Of The Vdc. Ref. To Vehicle Dynamics Control (Vdc)>Vdc Control Module And Hydraulic Control Unit (Vdccm & H/U)>Adjustment>Vdc Sensor Midpoint Setting Mode .